Leader

Collapse

Announcement

Collapse
No announcement yet.

Opinions Please! Bobcat Toolcat with skid unit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FR911
    replied
    Sounds like a good idea. Chicago has one for their USAR team.

    Leave a comment:


  • Bushwhacker
    replied
    Originally posted by slackjawedyokel View Post
    Saw a demo model - think it was made in Canada -- if its that hard to get to --- do you really need to go there ?
    These little guys are great for mop up too....

    Leave a comment:


  • slackjawedyokel
    replied
    Saw a demo model - think it was made in Canada -- if its that hard to get to --- do you really need to go there ?

    Leave a comment:


  • Bushwhacker
    replied
    Build it and I will test it out for you! Its like RX said its hard to say it really is, I think I would swap the bucket for a 6 way blade.

    Leave a comment:


  • RxFire
    replied
    I can't find it on the bobcat website, but I've been in firecamps where there are bobcat skid-steers running around with I'm guessing a 100-150 gal tank on front with a remote monitor. I'm guessing the pump was hydrostatic?? I don't know. They were being used to keep the dust down in firecamp. The tank also had a single wheel underneath like a trailer jack but larger for support.

    As for your design...Hard to say how well it may work or not based off literature vs. actual performance.

    Leave a comment:


  • Jeff oneal
    replied
    [ATTACH]20060[/ATTACH]

    [ATTACH]20061[/ATTACH]

    [ATTACH]20062[/ATTACH]

    Leave a comment:


  • Jeff oneal
    started a topic Opinions Please! Bobcat Toolcat with skid unit

    Opinions Please! Bobcat Toolcat with skid unit

    This idea has been in my head for a while now and have ran several searches and can't find anyone who has done it yet. I want to spec a bobcat toolcat 5600 as a wildland utv. The machine it self is very rugged and better built than most utvs on the market. It has a sharper turn radius and higher payload than any utv out there. In fact it is firtualy a small brushtruck. Most of my area is relatively flat with a few rolling hills. No real mountains to worry about. 70% brush country and the rest open coastal fields. I think with a 100gal skid untitled and 5gal foam in the back it would be unstoppable. A monitor could be added up front for one man opporation. I would obviously want to keep the front arm boom with a blade or bucket for cutting fire line.

    Now for a few specs for ya.
    56hp turbo diesel cab heat and ac. Two speed hydrostatic transmission. The bed is rated to haul and dump 2000lbs!!! Don't really need the dump but there is no option to leave it off. The rated lift for the boom arm is 1500 but I have tested it an it will lift more than that to a height of 7'.

    So my questions are these... Top travel speed is 18 mph. Do the departments that have the fire rescue utv's ever really run them that fast? Is speed a need for wildland FF? Also it weighs the same as a bobcat s150 which is about 5200lbs. It has the same tires as a skid steer and very rugged.

    So what do you guys think?

    I will try to add pics later because I can't post them from my phone. If you are itching to see what toolcat looks like just do a google search for toolcat 5600.

    Thanks in advance!!!

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X