Leader

Collapse

Announcement

Collapse
No announcement yet.

Harrington-Seaberg lever repair

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Harrington-Seaberg lever repair

    I needed to go back and revisit the mechanism actuator rod, it had been broken because the idiot seller didn't secure the mechanism in it's inner box, so during shipment it rattled around and broke the brass rod that sticks out through the door. So I soldered it since there was so little clearance that brazing it would have been much harder, but the inner door doesn't close right- the cutout slot in the door no longer aligns with the rod so I needed to unsolder and adjust the two pieces of the brass to be straighter. It was an easily reversable non-destructive repair that if it didn't work I would be able to try to braze it or replace it with one milled from brass bar stock.
    Last edited by wolff; 08-05-2016, 05:28 PM.

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X