Leader

Collapse

Announcement

Collapse
No announcement yet.

Small Dept Motel Response

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Small Dept Motel Response

    We have a couple good size modern motels in our town. Our small department response to fire alarms there have been hap-hazard and less than professional, in my opinion. I hate beating ourselves up, but one day we will look really bad when it's not just an alarm.
    Typically a response will include both our engines with a total of 5-8 FF. An automatic aid call goes to the only neighbor we have who will usually show up with 1 more engine and 2-4 more FF's. These are 2 story 60-75 room buildlings.
    We tend to group up and wander around looking for obvious problems, but really dont have a standardized plan or method to sort things out.
    I think we can do better.
    Anyone willing to share the small town SOG or process on how we can do a better more complete job at this type of call?
    Last edited by fireharley; 10-24-2009, 10:21 AM.

  • #2
    Some random thoughts,,,

    First officer or engine company to arrive reports to the fire alarm panel to determine alarm zone and then assigns crew to investigate area indicated.

    First engine prepares to be the attack engine, should fire be discovered, and stages near the area where the reported problem is, leaving room for additional apparatus (truck co if one is coming).

    Second arriving engine stands by for water supply, be it a hose lay, nurse feed operation, whatever. Second or third engine also prepares to connect fo sprinkler/standpipe connection if one exists. Assure that the rig drivers know how to make these hook-ups and the hosebeds/adapters are set up to facilitate such an operation. Verfiy proper system pressures (usually 150 PSI) if there is s suppression system/FDC.

    Teams search for the source of the alarm and radio/report back on findings, other personnel are on standby preparing to stretch a line and go to work, if a fire is found.

    Investigating personnel should have radios, handlights, forcible entry tools, a water extinguisher, thermal imager and building keys (if available). All firefighters should be properly dressed in PPE and have SCBA donned on their backs with masks at the ready.

    After each alarm, company officers and Chief discuss how they would have handled a fire at the location in the motel where the alarm was found to be coming from. Where would the line have been stretched from, where to, who would do the vent, search, utlility control etc? If you have a few bucks, invest in one of those measuring wheels to verify your hose lines will reach the rooms from the rig, and make sure your officers can do a good hose estimate, not just dump a preconnect and hope it reaches.

    Make each faulty alarm/non-fire run a learning expierence. Assure all members understand the building, the places fire would spread, how to get in, how to get out, where utlilty rooms are etc.

    Hope this helps

    Comment


    • #3
      Originally posted by fireharley View Post
      We have a couple good size modern motels in our town. Our small department response to fire alarms there have been hap-hazard and less than professional, in my opinion. I hate beating ourselves up, but one day we will look really bad when it's not just an alarm.
      is this the same as a working fore response? our AFA is 1 engine 1 truck, on recieving a working fire call it is 2 engines, 2 trucks, and a medic. big differnce.

      Typically a response will include both our engines with a total of 5-8 FF. An automatic aid call goes to the only neighbor we have who will usually show up with 1 more engine and 2-4 more FF's. These are 2 story 60-75 room buildlings.
      if it is buring dispatch will likely get a thousand calls (everyone with cell phones), upgrading the box should be automatic
      We tend to group up and wander around looking for obvious problems, but really dont have a standardized plan or method to sort things out.
      I think we can do better.

      our plan is 1st arriving- drvr=stays with engine, oic=goes to panel/talks to mgr, nozzleman (canman) and irons/tic = finds area of alarm from oic and investigates with tic 2nd due = stages on street

      Anyone willing to share the small town SOG or process on how we can do a better more complete job at this type of call?
      hope that helps, if you have more than 4 on the 1st due, the remainder stays with the rig incase of a stretch is to be needed.
      Originally Posted by madden01
      "and everyone is encouraged to use Plain, Spelled Out English. I thought this was covered in NIMS training."

      Comment


      • #4
        Our small FD runs numerous alarms to hotels/motels. Having poor staffing is always an issue so we've designated them high risk occupancies and any alarm is a full first alarm assignment. For us that's only 2+1 and a bus, though an automatic recall of all off duty and call personnel.

        Duty officer goes to the panel to find the zone. First engine crew to the floor in the zone, and short of secondary reports, the truck crew and firefighter from the ambulance go to the floor above. This can be modified depending on staffing at the time of the call (ambulances out, second engine delayed, etc).

        We also run automatic aid to the next town over for a hotel on our border and our engine crew stays together and takes whatever assignment they're given unless we arrive first, in which case our officer takes command and splits the crew floor/zone and floor above.

        In all honesty in the last 14 years we've not had a burner in any hotel that one or two sprinkler heads didn't control. More often than not if it's anything its a water issue from the floor above pouring into the detection device. This being said our crew assignments reflect our experience, which is not necessarily the best way.

        Comment


        • #5
          Originally posted by RFDACM02 View Post
          Our small FD runs numerous alarms to hotels/motels. Having poor staffing is always an issue so we've designated them high risk occupancies and any alarm is a full first alarm assignment. For us that's only 2+1 and a bus, though an automatic recall of all off duty and call personnel.
          Well let me re-interate. Our response is the same for every alarm or fire call. The one to three engines that will usually respond is it. No first or second alarms, no full box, no trucks, no backup staffing plan. What you get is well, what you get. The next closest volie neighbor is 61 miles away and they will not respond as that would clean out their town. We have had this type of call with just 3-4 FF responding depending on time of call. Hard to dedicate people to tasks when you are short on people.

          MG3610: you have provided a good basis to work from. It will sure beat the mulling around discort that currently goes on. Thanks
          Last edited by fireharley; 10-24-2009, 07:55 PM.

          Comment


          • #6
            Your problem isn't limited to small depts only, many medium and big cities also show up without a clear plan or idea of what to do. The difference is that in alot of the cases with medium and big cities is that they can throw more manpower or equipment into the equation.

            Several good responses so far, not sure what I can add but heres a couple thoughts:

            Measure the distance from each entrance to the center of the hotel hallway to see if your cross lays are long enough to reach the center or not. This would also include going up interior stairs or working off standpipes if present. If your hose doesn't reach the room that is in the middle of the hallway then you know you immediately have to add sections or run a gated wye.

            Determine with hotel management how quickly they can provide you a print out of occupancy levels. Big difference between a Tuesday night when it's partially full and a Saturday night on a holiday weekend when it's completely filled.

            Preplans have already been mentioned. Know your utility locations, alarm panel locations, stairwells, elevators, FDC's, the list goes on.

            Realize that in alot of smaller departments, sometimes it takes one person to take the bull by the horns. Get a buddy and start preplanning it on your own. Outline a proposal on paper. Think it out make it look good, then take it to your Chief/brass. They are likely to tell you to run with it...they may be so busy with other things that they haven't put the time into it so will welcome your proposal. If they get bent out of shape that you did it, well, you and your buddy will still be prepared should either of you ever end up first in or in command.

            If there is a bigger sized department with inspectors that you can access information from then give that shot. Read, learn, study.

            Most of all, don't panic, whether it's the big one or the routine little one. Take your time, look at what the situation is telling you, make the best decision with the information you have in front of you, and always have a backup plan. Good luck.

            Comment


            • #7
              the biggest thing is to have the officer and at least 1 firefighter go to the alarm panel (which should have a zone map) and then going to the area indicated to investigate the alarm.

              Comment

              300x600 Ad Unit (In-View)

              Collapse

              Upper 300x250

              Collapse

              Taboola

              Collapse

              Leader

              Collapse
              Working...
              X