Leader

Collapse

Announcement

Collapse
No announcement yet.

Info needed ASAP: Trench/Collapse Struts & Shoring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Info needed ASAP: Trench/Collapse Struts & Shoring

    Why ASAP? 'Cause the Chief asked me to do this...two months ago. Been very busy this summer and he tracked me down Sunday

    Anyway, I need manufactures and/or info on struts/shores to be used as part of a regional heavy rescue team.

    Initial emphasis of the team is on trench rescue & confined space, although I anticipate that will extend to collapse rescue with a couple years.

    The regional system has three rescue trailers, plus a fourth Sheeting & Shoring trailer. Depending on cost & how the systems work, either the struts will be distributed among the rescue trailers to allow some quick "first aid" stabilization while awaiting the other units to complete a full stabilization or they may all be carried on the Sheeting & Shoring trailer.

    Vendors/Manufacturers are welcome to contact me at [email protected] .

    I have vacation next week, and really want to pull the information together and get quotes put together for a decision very early in September. More info I can get before this weekend the better, since I'll be on truck coverage at our county fair so I'll have plenty of time to read!
    IACOJ Canine Officer
    20/50

  • #2
    Dal90,

    I've found that Air Shore is the best shoreing equipment on the market. www.airshore.com Contact your local rep and request a demo.

    SFDENG2

    Comment


    • #3
      Dal90,

      SFDENG2 again, I don't know if Shipmans carries Air Shore in your area but if you can't find a dealer to demo the stuff then E-mail me and I can set it up for you. [email protected]

      Comment


      • #4
        We use Speedshore with mineral water. When I took my trench class, we also used Paratech struts (not the ACME locks but the other ones...) I myself like the Paratech ones over the speedshore, but the with the speedshores you do not have to get into the trench to put them in (or use rope).




        .zimm

        Comment


        • #5
          Holmatro also offer struts for shoring.
          Luke

          Comment


          • #6
            Hey Bro quit procrastinating, no one else here EVER does that. :-)

            Another company Rescue 42 (http://www.rescue42.com ) has good stuff. Surf their site. The telecribbing link is decent with a lot of good photos.

            Be safe Dal!

            JW
            "Making Sense with Common Sense"
            Motor Vehicle Rescue Consultants
            ( [email protected]) Jordan Sr.

            Comment


            • #7
              Hey All,

              Haven't posted here for awhile, and the new system is so screwed up that it won't let me use my old User Name: Rescue 42.

              Wanted to clear something up: JW, thanks for the plug, but Rescue 42 Struts are not rated for trench. We are easily strong enough, but I have not yet taken the time to get the certification.

              Both Paratech and Airshore Structural struts are rated for trench rescue, but they are big and expensive. By far the most economical and space saving option is to contact a local contractors supply store for Trench Jacks. There are several brands, and they are cheap.

              Tim O'Connell
              www.rescue42.com

              Comment


              • #8
                That's a good idea I'll pursue, Tim.

                I don't have a problem using "industrial" equipment instead of "fire service" equipment when it's appropriate. Especially something as common in industry and uncommon in the fire service as shoring jacks, and if that lets us afford a larger number of jacks that would be great.

                Do you/anyone know if there is NFPA standards that apply to trench shoring and/or building collapse jacks?

                Matt
                IACOJ Canine Officer
                20/50

                Comment


                • #9
                  One more option, Try my website at www.zmagrescue.com for the "quick", "Bandaid devise" which gives you time to go call the truckload of lumber. Check the "Z-Shores" page. Let me know, we may even be able to get you a set to play with before you decide to purchase.
                  Mike @ Zmag

                  Comment


                  • #10
                    Matt,

                    NFPA 1006 and 1670 cover the training requirements for trench rescue (and other types of rescue). BUT, I am not certain the equipment spec info is included in it. Also the federal info for protective systems can can be found in the 29 CFR 1926.650-652

                    ( http://www.afscme.org/health/excav05.htm ) <-----that link gives you a taste of what the CFR has for info.

                    If you can get your hands on hard copies of those published requirements they will probably help a lot more than we can here.

                    Be safe.

                    Fraternally, JW
                    "Making Sense with Common Sense"
                    Motor Vehicle Rescue Consultants
                    ( [email protected]cast.net) Jordan Sr.

                    Comment


                    • #11
                      Airshore.

                      The ART (air rescue tool) can be used for trench, collapse, extrication, Confined space and airshore has been around for ever.
                      They make a good product and are almost maint. free.

                      Comment

                      300x600 Ad Unit (In-View)

                      Collapse

                      Upper 300x250

                      Collapse

                      Taboola

                      Collapse

                      Leader

                      Collapse
                      Working...
                      X