Leader

Collapse

Announcement

Collapse
No announcement yet.

Deploying Airbags

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    Bushwhacker
    Forum Member

  • Bushwhacker
    replied
    Originally posted by voyager9 View Post
    Why does Plan-A in the fire service always involve hitting something with a hammer?
    Because Life is to short to ***** around

    Leave a comment:

  • Rescue101
    Forum Member

  • Rescue101
    replied
    Originally posted by voyager9 View Post
    Why does Plan-A in the fire service always involve hitting something with a hammer?
    Stress relief,hehe T.C.

    Leave a comment:

  • voyager9
    MembersZone Subscriber

  • voyager9
    replied
    Originally posted by nmfire View Post
    SRS system wiring is usually in an orange sleeve. You could manually fire each one by cutting the wires to the bags and applying power to them. I don't know if it this would work, but I suppose you could whack one of the sensors with a hammer and see if it fires the system?
    Why does Plan-A in the fire service always involve hitting something with a hammer?

    Leave a comment:

  • Rescue101
    Forum Member

  • Rescue101
    replied
    Originally posted by nmfire View Post
    Doh. Yea that's what I meant. Orange to the best of my knowledge would/could be the high voltage from the batteries on a hybrid or EV.
    Yup,you WON'T enjoy that.hehe T.C.

    Leave a comment:

  • nmfire
    Forum Member

  • nmfire
    replied
    Originally posted by Rescue101 View Post
    That would be a YELLOW sleeve. DON'T mess with anything in a ORANGE sleeve. T.C.
    Doh. Yea that's what I meant. Orange to the best of my knowledge would/could be the high voltage from the batteries on a hybrid or EV.

    Leave a comment:

  • Rescue101
    Forum Member

  • Rescue101
    replied
    Originally posted by Bushwhacker View Post
    That is the way I remember Seeing done, a Bendix King Clam shell and a pair of jumper wires, and Boom she was gone. I Am not sure on the color combination but Orange gives me a start.
    Unplug the connector(two wire)on the yellow sleeve, and extend the wires about 20'(lamp cord works good). A nine volt battery will Fire them.Similar connector under the passenger side. OR leave a good battery in the car,ign on and whack the front sensor. If it isn't a smart sensor it MAY work. T.C.

    Leave a comment:

  • Rescue101
    Forum Member

  • Rescue101
    replied
    Originally posted by nmfire View Post
    SRS system wiring is usually in an orange sleeve. You could manually fire each one by cutting the wires to the bags and applying power to them. I don't know if it this would work, but I suppose you could whack one of the sensors with a hammer and see if it fires the system?

    You're better off reading the ERG for the vehicle in question and seeing how to properly disable the system.
    That would be a YELLOW sleeve. DON'T mess with anything in a ORANGE sleeve. T.C.

    Leave a comment:

  • sklump
    MembersZone Subscriber

  • sklump
    replied
    There should be yellow connectors at the base of the column and under the glove box, sometimes at the side panels of the dash. You can cut the wires, but cut them different lengths. Just be careful, static electicity can set them off.

    Leave a comment:

  • Bushwhacker
    Forum Member

  • Bushwhacker
    replied
    Originally posted by nmfire View Post
    SRS system wiring is usually in an orange sleeve. You could manually fire each one by cutting the wires to the bags and applying power to them. I don't know if it this would work, but I suppose you could whack one of the sensors with a hammer and see if it fires the system?

    You're better off reading the ERG for the vehicle in question and seeing how to properly disable the system.
    That is the way I remember Seeing done, a Bendix King Clam shell and a pair of jumper wires, and Boom she was gone. I Am not sure on the color combination but Orange gives me a start.

    Leave a comment:

  • nmfire
    Forum Member

  • nmfire
    replied
    SRS system wiring is usually in an orange sleeve. You could manually fire each one by cutting the wires to the bags and applying power to them. I don't know if it this would work, but I suppose you could whack one of the sensors with a hammer and see if it fires the system?

    You're better off reading the ERG for the vehicle in question and seeing how to properly disable the system.

    Leave a comment:

  • Bushwhacker
    Forum Member

  • Bushwhacker
    started a topic Deploying Airbags

    Deploying Airbags

    I have a couple Cars Slated for extrication training and for once i Actually have airbags inside of them! The only problem now is my brain is rusty And i cant remember what wires deploy them, Can any one help me out here?

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X