Leader

Collapse

Announcement

Collapse
No announcement yet.

crib cutting template

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rescueraver
    replied
    Cut your cribbing to length i.e. 18 inchs. Take a straight edge place on diagonal corners, mark with a pencil. Put on safety glasses, turn on table saw or band saw, carefull feed the wood block through the saw following the mark you made. When useing a table saw you may have to flip the wood over and cut the other side.

    PSA WARNING: Be very careful the blade is very sharp and will cut off your fingers and other body parts. The arthor is not liabel for incompentace while useing power equipment.

    Leave a comment:


  • ejfeicht
    replied
    We utilize full dimensional white oak lumber 4"x4"x18" and 2"x4"x18" for cribbing and we have the mill cut our wedges corner to corner out of the 4"x4"x18" material. This yields (2) 18" wedges out of each piece of 4"x4"x18" lumber and having them cut this way makes them easy to store.

    Leave a comment:


  • res2cue316
    started a topic crib cutting template

    crib cutting template

    Anyone have any useful information for cutting wedges? I am trying to find a diagram of a cutting table with templates.

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X