Leader

Collapse

Announcement

Collapse
No announcement yet.

Zeagle Regulator Recall

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Zeagle Regulator Recall

    For immediate release
    Zeagle Regulator High Pressure Seat Recall - May 21, 2003
    Copyright Zeagle Systems, Inc. 2003

    Zeagle Systems, Inc. is recalling 931 first stage Scuba regulators
    sold between January 20, 2003 and

    May 19, 2003. If you have one of these regulators it is essential to
    take it to your dealer for immediate repair. Do not attempt to dive
    with this regulator again until the regulator has been inspected and
    by an authorized Zeagle dealer.

    The first stage regulators affected are the following models:

    FlatHead Six
    s/n F001391 to F001476

    50D
    s/n B003315 to B003652

    DS-IV
    s/n A001352 to A001571

    Envoy
    s/n C001117 to C001403

    The serial numbers are stamped on each first stage body.
    Zeagle regulators that have been serviced since January 20, 2003 may
    also be affected.

    These first stage regulators may have a defective high-pressure
    seat that could cause the first stage to over pressurize. If this
    occurs, the air supply to the diver could be interrupted, making it
    impossible for the diver to breathe from the regulator. This type of
    failure is most likely to occur upon initial pressurization of the
    regulator and is unlikely to occur underwater.

    If you own one of these regulators, take it to your authorized
    Zeagle dealer for a free inspection and repair. Call 1-800-771-5568
    or contact any authorized Zeagle dealer for information on obtaining
    a free repair. Zeagle Systems, Inc. is located at:
    37150 Chancey Road
    Zephyrhills, Florida 33541
    USA


    -POSTED ON-
    SAR DIVER FOURM:
    http://groups.yahoo.com/group/SAR-Diver

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X