Leader

Collapse

Announcement

Collapse
No announcement yet.

NFIRS Reporting...What do you use?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cmjones
    replied
    From my understanding..and correct me if I am wrong, but I think FEMA has a 5.0 program for the NFIRS that is Windows based, but at this time, South Carolina is just in the testing phase of the new 5.0 software.

    Leave a comment:


  • 80FIRE
    replied
    I agree with jboczek
    We use the free version of firehouse software. Took a long time to get everything set up and going but is great now. A decent computer is a must. Our old one was to slow amd took forever to do a report. I like the department reports that can be generated from the information. (most fires happen on Monday evenings)(firefighter Jones had a 87% attendance rate last year)

    Is there any chance the state will help departments when they upgrade this fall. If so try to get by with the dos version or the paper forms, if they still accept them, untill some thing better is available this fall.

    Leave a comment:


  • cmjones
    replied
    Thanks for the replies.

    FYI..I downloaded Firehouse Software v5 evaluation. Its pretty cool. Costs $860 but I will be checking with FEMA to see if our extra $ will cover that.


    I didn't expect NFIRS to be this detailed! Lot of info to keep track of.

    Leave a comment:


  • jboczek
    replied
    We use Firehouse. IL state fire marshall gave it to use with the basic NFIRS module activated. It's not simple, either, although it is a windows based program. We've been using it for about 2 years now and I still get the book out once in a while. It's not cheap, either, so if you can save a little money in your purchase from the grant, get FEMA to let you buy a new computer and software to report. It's allowed and if you have extra money, they'll work with you. Firehouse does run a lot faster if you have a 800 MHz or faster system with at least 128 k memory.

    Leave a comment:


  • BC79er
    replied
    We've been using Firehouse (v3 I think) Software. Texas is not taking anything other than NFIRS 5.0 after Nov. 30th so we're upgrading to the new version shortly. All we really use it for is reporting right now, but there's a lot of other useful parts to the program. Awful nice that the state gives you something. We're all on our own for reporting since it's not mandated by the state, just the grant terms from last year and hopefully this year.

    Brian

    Leave a comment:


  • cmjones
    started a topic NFIRS Reporting...What do you use?

    NFIRS Reporting...What do you use?

    Currently SC is still using the NFIRS 4.1 version with plans to upgrade to 5.0 in about six months. I asked to be sent the 4.1 version, which is DOS based. After playing around with it, I found it too complicated to worry with. So I am looking for a better alternative until the state starts sending out free 5.0's.

    Any suggestions on an easy to use, cheap software or something to use to report to NFIRS? I have my eye right now on nfirsonline.com if anyone has used it could give me some insight. It appears to be the cheapest way to go so far.

    We are a vol. fire dept that just needs to report to NFIRS to obligate the terms of our grant. We don't need anything fancy with all kinds of modules.

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X