Leader

Collapse

Announcement

Collapse
No announcement yet.

Ventilation Saws...Which Ones #1?

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ventilation Saws...Which Ones #1?

    Partner? Cutters Edge? Vent-Master? Which one is the most dependable? We're going to replace our old K-12 and I'd like to hear your thoughts on whats the best and what everyones using. Thanks...Be Safe.

  • #2
    We just replaced our old vent saw with the new K-1250. It is heavier than our other vent saw, but it sure does a great job!

    ------------------
    SERVING FOR PRIDE
    PROUD TO SERVE!

    Comment


    • #3
      The Cutters Edge is an exceptional tool. I don't believe it could be out performed by any other saw. Good luck.

      Comment


      • #4
        Boy, this thread again? It's deja vu all over again. Here's the top three: Cutters Edge, Cutters Edge and Cutters Edge. The edge is our primary roof/overhaul/RIT saw, with a Stihl rotary for metal or stone work.

        Comment


        • #5
          My humblest apologies for starting this thread "again". I appreciate all the responses so far and look forward to more.

          Thank.

          Comment


          • #6
            We just bought a Vent-Master about a year ago and it has worked great so far...

            ------------------
            Tom Pysh
            President/Lt38-1
            Ellsworth/Somerset V.F.D.
            www.geocities.com/esvfd3870

            Comment


            • #7
              Chainsaw: Cutters Edge CE650 (I think that's the model #)

              Circular Saw: PARTNER K-700A with the WARTHOG brand blade......KICKS ***!!!!

              Stihl circular saws are just too damned heavy!!

              (by the way, the K-700A is a smaller version of the K-1200....lighter and easier to handle..)

              ------------------
              "Loyalty above all else, except honor."

              Comment


              • #8
                We have a couple of K-650's. Great saws.

                For chainsaws, we just use the Stihls from the local dealer. Try as we might, we can't convince the powers that be that a $1200 saw is better than a $400 one. We did put a larger pull handle and better chain on them though.

                Comment


                • #9
                  Having used both the rotary and cutter's edge, it is this firefighter's opinion, that the cutter's edge saw is superior. Cutter's edge is more powerful, the depth gauge is advantageous to a quality cut and with proper maintenance will provide far better service.

                  Comment


                  • #10
                    we use a cutters edge, and mongo fire I know the feeling, I made the motion to buy the C.E. and still have some of the older guys in our dept. mad at me for doing it. The cutters edge is great, I've used damn near every saw they've thrown at us and I havent found one that can beat the cutters edge for ease of use, starting, and maintanance. When your on a small volly dept. like alot of us are, you better make sure you get something EVERYBODY can start when they are nervous because you never know who's gonna be the one to grab it.

                    these are only my opinions please take them as that

                    Comment


                    • #11
                      The Partner K950 Active with a 24 tooth carbide tipped blade. we did a head to head test (Partner vs. cutters edge) on a shingle roof and the Partner got the job done faster. That means you will be off the roof quicker. The cutters edge is a good saw but I prefer the raptor carbide tipped chain to the bullet blade. Just my thought.

                      David Polikoff
                      www.workingfire.net

                      Comment


                      • #12
                        Cutters Edge!!!
                        I have had the chain haning off the bar six inches and still made cuts... Training of course.
                        A little pams spray on the bar during teardown really helps the sh$# from sticking to it. We use the garlic, smells good and makes you work faster... So you can eat that much quicker...

                        Comment


                        • #13
                          our department uses husqavarna quick vents. they work great and are fairly lightweight. we use carbide tipped chains for them. they are perfect for whatever we need them for whether it is opening the roof or droping a wall. quick vents forever.

                          Comment


                          • #14
                            My personal preference is the cutters edge its light weight, easy to use and the depth gauge works well. I have used the Partner 650 and I don't really care for it. I have used the Quick vent saw as well. I'm not a fan of it. The curved bar is alright but I like having the depth gauge of the cutters edge better. I even used a Johnson Red with a carbide tip chain once. It did the job but, it didn't compare to a cutters edge.
                            So I guess its up to the individual as to what works best for them. I know my choice is the cutters edge and on our truck we have choice between the cutters edge and the Partner saw.
                            Whatever you decide on I hope it works for your department.

                            Comment


                            • #15
                              Partner K-650. If that's not available any other Partner K Series Saw. Chainsaws are for cutting trees not roofs.

                              Comment

                              300x600 Ad Unit (In-View)

                              Collapse

                              Upper 300x250

                              Collapse

                              Taboola

                              Collapse

                              Leader

                              Collapse
                              Working...
                              X