Leader

Collapse

Announcement

Collapse
No announcement yet.

firefighting gloves

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MetalMedic
    replied
    I have the same problem. The CROSSTECH gloves are the best fitting ones I have come across... had mine for a couple years now, not sure where you can get them at anymore. If anyone knows, let us know since it is time to replace mine!

    Leave a comment:


  • Rescue 21
    replied
    Ask whoever gets your gear if they make a 'cadet' glove. They are the same style, just have shorter fingers. Most mfg's have them but you have to ask. Not much worse than gloves that dont fit. How are you supposed to work?

    Leave a comment:


  • wsfiremn
    replied
    You might try looking at www.edarley.com they have all kinds of gloves from xs-xxl.
    you also might check p&r products at www.thefirestore.com they have a large selection of gloves also.I had the same problem I wear a large glove but the fingers where to long somy department ordered me some from darley they ran about $35.00.


    hope this helps

    [ 09-01-2001: Message edited by: wsfiremn ]

    Leave a comment:


  • Captain Gonzo
    replied
    Maybe Jake the Hose Monkey has a "finger stretcher" you could borrow!

    I would try looking for small size gloves. Have you tried Gall's?

    Leave a comment:


  • chris a
    started a topic firefighting gloves

    firefighting gloves

    I need gloves with short fingers.A med. or large is fine but the fingers are an inch too long.I would appreciate any info I can get.Thanks

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X