OSHA 2 in 2 out regs..

[fireman phil]

I am looking for the OSHA reg. number for the 2 in 2 out and where I can obtain a copy of the requirements on the web or by other means.

your help is greatly appreciated,


Yours in the fire service

FIREMAN PHIL

------------------
Fireman Phil of the Show Me State

[Ten8_Ten19]

http://www.osha-slc.gov/OshStd_data/1910_0134.html

See section g(4) interior structural firefighting.

[bgreen]

You may also want to check out NFPA 1710 it has some interesting language on IRIT and RIT teams.

[rogerk]

29 CFR 1910.134 is as previously posted the regulation, but it's helpful to also see the final rule posted in the federal register. It has a lot of the discussion that took place before adoption, although it is pretty long.

NFPA 1500 is a lot more specific than NFPA 1710 & 1720 and is the basis for the regulation in for the most part.

The IAFF has a useful commentary on the rule also, keep in mind they were there at the rule making process.
http://www.osha-slc.gov/FedReg_osha_...D19980108.html
http://www.iaff.org/iaff/Health_Safety/regs_1.html

I also refer back to a couple of formal interpretations from OSHA that can be found online.
http://www.osha-slc.gov/OshDoc/Inter...I19981215.html
http://www.osha-slc.gov/OshDoc/Inter...19950501C.html
http://www.osha-slc.gov/OshDoc/Inter...I19990312.html

A pretty useful resource to have on hand too, is the Fed. OSHA directive for inspection and citation procedures for compliance with 1910.134.
http://www.osha-slc.gov/OshDoc/Direc...L_2-0_120.html