Leader

Collapse

Announcement

Collapse
No announcement yet.

Pre-Fire Plans Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pre-Fire Plans Help

    I just started with a new, smaller department and we have a limited amount of commercial occupancies in the district, but of significance still. We have a lot of children's occupancies (i.e. schools, camps, large lake, etc.) and the pre-fire site plans that exist are very old and have been copied over and over so that you cannot read anything on them and were all hand drawn. At my previous department we had very nice computer drawings and information sheets of every commercial occupancy. I inquired to the firefighter in charge of doing all of that with my old department and he told me that Microsoft Visio was used after importing CAD drawings. I also have seen/heard of an add-on for Visio called FireLine Pre-Fire Plan and Map Graphics Package for Microsoft Visio (http://www.brgproducts.com/page5.html). These are very spendy products and am trying to do some preliminary research and get opinions before I bring this product to the attention of my department's administrators. Any comments or other ideas are GREATLY appreciated.

    Thanks a lot!
    -Mitch Nolze
    www.swrfa.org


    "I have no ambition in this world but one, and that is to be a fireman. The position may, in the eyes of some, appear to be a lowly one; but we who know the work which the fireman has to do believe that his is a noble calling. Our proudest moment is to save lives." ~Edward F. Croker

  • #2
    Check out this company they are in your back yard.

    http://www.cadzone.com/Fire_Zone/Fire_Zone.htm
    Fire Sprinklers Save Firefighters’ Lives Too!

    Comment


    • #3
      Preplan

      Originally posted by firefighterMV View Post
      I just started with a new, smaller department and we have a limited amount of commercial occupancies in the district, but of significance still. We have a lot of children's occupancies (i.e. schools, camps, large lake, etc.) and the pre-fire site plans that exist are very old and have been copied over and over so that you cannot read anything on them and were all hand drawn.
      Speaking only of the facility I work at: We had no facility drawings in electronic format, and like yours were full of handwritten notes, I had the drawings scanned & cleaned up. Cost per sheet was ~100.00.

      I sent copies in DXF format to the local FD. I also had copies printed on waterproof paper ready to hand over to the incident commander when he arrives on site.

      The same information is being used to populate the room number E911 database in our RedSky box that is attached to the PBX.

      For less then $1000.00, we resolved multiple issues (Preplan, Incident Command, E911, and facilities managament).

      You may want to have the property owners address the lack of documentation at their expense. It's really a cheap fix.

      Comment


      • #4
        Pre-Fire Plans

        I know your looking for a pre-plan system, we use a pre-plan system that feeds off our fire inspection system. The vendor is call Emergency Software Products. We have been using their software for the past 16 years, the software works, it takes all the property information, emergency contact, building, sprinkler, utilitties, etc. The pre-plan side of the software feeds the infromation to the FD in a read only format along with any floor plan, digital photo.

        www.emergencysoftware.com

        If you would like any more information, please feel free to contact me at [email protected]

        William Smith
        Fire Marshal

        Comment


        • #5
          Pre Plans

          Check out www.CommandScope.com . Easy to use program will allow you to add any drawings you already have (including Visio) just as you would add an attachment to an email. Also, it auto syncs with every computer (even mutual aid). Great form with touch access to all docs needed.

          Comment


          • #6
            real help

            Are you required to perform and document them? Are they used or is it just for ISO points? How do you store them. Describe the type of incident and how helpful the pre-fire plan was in the out come of the operation.your post is really helpful in this regard.
            Last edited by mariaakerry; 11-12-2010, 06:33 AM.
            Mariaakerry

            Comment


            • #7
              I think Command Scope might be a good look also. I've never used it myself for any pre fire prevention plans or anything like that, but a fireproofing nyc company that I do business with refers to that website a lot. Not really sure what for, but I do know that it's worth checking out considering what you're looking to do.

              Comment


              • #8
                preplan maps

                I'm in the same boat, and we don't have the horsepower to create preplan maps. We can barely get engine company inspections completed. So while autocad and turbo cad and visio are all options for departments with the staffing to facilitate it, we just wouldn't be able to get to sitting down and entering it all into a cad program.

                I understand there are firms that will come to a small district and create pre plan maps of every commercial occupancy. Does anyone know of such a creature and how I could contact them? Thanks, Mike G, Cambria FD

                Comment


                • #9
                  CommandScope now has clients in over 20 States and Canada (ranging from small volunteer departments to counties) and is really setting a Pre Plan standard since achieving NIMS accreditation by FEMA.

                  Comment


                  • #10
                    Is your chief registered on the ISO website? There is a section there for commercial buildings. There isn't maps or drawings but there is some useful information there.
                    NREMT-P\ Reserve Volunteer Firefighter\Reserve Police Officer
                    IACOJ Attack

                    Experts built the Titanic, amateurs built the Ark.

                    Comment


                    • #11
                      We use them as well and haven't had any problems. Very user friendly from what the guys who use it say.
                      Good on you for taking on a project like this.


                      Originally posted by InsuranceLCRep View Post
                      Check out this company they are in your back yard.

                      http://www.cadzone.com/Fire_Zone/Fire_Zone.htm
                      Motivation is something that you bring to work in your lunch box. - Skip Kirkwood, Wake county NC EMS director

                      Comment

                      300x600 Ad Unit (In-View)

                      Collapse

                      Upper 300x250

                      Collapse

                      Taboola

                      Collapse

                      Leader

                      Collapse
                      Working...
                      X