Leader

Collapse

Announcement

Collapse
No announcement yet.

Pierce predrilled toolboards

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • LittleJoe7197
    replied
    I think the PAC "boards" line up with PAC brackets. We have aluminum pegboard (4-Guys) toolboards which have 1/4" (3/16"?) holes that are 1" on center. The PAC bracket holes almost line up. The 1/4" bolts thread in almost like being tapped and while the bolts go in at an angle they still thread in and hold well. There are some holes that need to be drilled though.

    Leave a comment:


  • Cutlass84
    replied
    If it's basically aluminum pegboard like E-one uses, i'd say no. I had to modify every $&%* bracket to get everything mounted without drilling new holes in the board.

    Leave a comment:


  • cfcff36
    started a topic Pierce predrilled toolboards

    Pierce predrilled toolboards

    Does anybody know if any of the tool and equipment mounting brackets from like zico or pac have mounting holes that line up with the predrilled holes on these toolboards?

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X