2006-2007 Chassis Pricing

[NewJerseyFFII]

If any fire departments are interested in purchasing a new apparatus in the near future here is a list of chassis from Spartan & Hme ! " Spartan " single axle chassis : Big Easy - $ 110,580 Advantage - $ 136,355 Diamond - $143,856 Gladiator - $ 171,635. Hme Chasis - P2e $99,557 P2 Raised Roof $124,137 . 1871S 400hp - $141,332 1871S 450hp- $153,343. " Spartan " Tandem axle chassis: Gladiator Aerial ladder $ 187,239 Tower ladder $ 192,883.

[NewJerseyFFII]

If any fire departments are interested in purchasing a new apparatus in the near future here is a list of chassis from Spartan & Hme ! " Spartan " single axle chassis : Big Easy - $ 110,580 Advantage - $ 136,355 Diamond - $143,856 Gladiator - $ 171,635. Hme Chasis - P2e $99,557 P2 Raised Roof $124,137 . 1871S 400hp - $141,332 1871S 450hp- $153,343. " Spartan " Tandem axle chassis: Gladiator Aerial ladder $ 187,239 Tower ladder $ 192,883.

The custom chassis prices are off a state bid list from a major apparatus builder !..

[BoxAlarm187]

Great general information to have, but remember that a lot of times, a state contract price will be lower than the "one-time" customer can get.

Regardless, it's a good base for people to start to from.

[NewJerseyFFII]

This state contract price is available to any fire departments in the state of PA, and are about the same if you go out to bid from Spartan -or- HME. Maybe a few dollars more for purchasing only a single unit!....

[NewJerseyFFII]

Commercial Chassis

2006-2007 Commercial chassis : KW 2 Door base-$68,683 KW 4 Door-$84,648 Freightliner 2 Door base-$70,704 4 Door-$78,380 All Wheel Drive-$ 81,350 IHC 4400 2Door -$71,428 IHC 4400 4 Door-$78,852 IHC 7400 2 Door All Wheel Drive -$79,179 IHC 7400 4 Door All Wheel Drive -$88,316 .

[LVFD301]

Can't imagine using a commercial 4400 chassis on the International. The 7400 pricing is $77,984.00 current bid.

KW $73,884.00 T300.

[SBrooks]

does anyone have a .pdf drawing of a freightliner crew cab chassis, or any other means of determining the axle to back of cab dimension & the bumper to back of cab dimension?

[ChiefDog]

does anyone have a .pdf drawing of a freightliner crew cab chassis, or any other means of determining the axle to back of cab dimension & the bumper to back of cab dimension?

You could call your dealer and ask for the CA measurement. CA is the cab to axle. It has been a few years since we ordered but I think you can order the CA to the nearest inch from most Commercial truck suppliers. (medium/heavy duty) It depends on the body you are putting on.

If you have a design (.pdf) from the body builder it will have the required CA.