Leader

Collapse

Announcement

Collapse
No announcement yet.

S/N scott air pak 4.5

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    BobM
    Forum Member

  • BobM
    replied
    Medic190 Where did you get this info? A Scott tech manual? If so, which manual and where. I could only find info for the older pressure reducers in the Scott tech manual. Thanks.

    Leave a comment:

  • ssooss
    Forum Member

  • ssooss
    replied
    thanks brothers for perfect answers


    medic190 thank you

    Leave a comment:

  • medic190
    Forum Member

  • medic190
    replied
    SCOTT serial number configurations

    Remove the cylinder and you should see the serial plate. Depending on the age of the Scott Pak, the serial number (pressure reducer) should look like:

    115S060812345

    115S - Internal tracking, 06 Year of manuf., 08 Week of manuf., 12345 unique identifier

    NE011602945BB2

    N- new, E- Month of manuf (A-M excluding I) 01- Year of Manuf., 16029 Internal tracking, 45- Working pressure, BB- Dual manifold, 2- Internal tracking

    89211234

    89- Year of manuf REVERSED, 21- Month of manuf REVERSED, 1234- Internal tracking

    Any upgerades will have an additional 'tag' that looks (for example) like : N0909 or C0909 (N- NFPA upgrade 09- Month, 09- Year, C- CBRN upgrade MMYY)

    The regulator has the same configuration (mostly) I know it can be a pain, but it is important to record all the serial numbers on the Pak (reducer, regulator, PASS) for complete and accurate records, which will help to understand if the unit has any warranty left (not to mention recording any repairs on individual components)

    Warranty:

    2.2, 3.0, 4.5, AP50's: 1/8/15

    1 Year electronics, 8 year "bumper to bumper" and 15 years pressure reducer

    AP75's: 3/10/15

    3 Years on electronics, 10 years "bumper to bumper" and 15 years pressure reducer...

    If you have further questions, feel free to ask!

    Leave a comment:

  • Catch22
    MembersZone Subscriber

  • Catch22
    replied
    The primary component of the pack is that pressure reducer, at least with a Scott. The back plate and other components can be replaced, which is why they put the S/N there.

    I don't know how Draeger or anyone else does it, but I know they have different systems in regards to the pressure reducer.

    Leave a comment:

  • ssooss
    Forum Member

  • ssooss
    replied
    but the dragar the S/N it is on the back plate
    and when we change the reduser we need to changt the S/N

    thank catch22

    Leave a comment:

  • Catch22
    MembersZone Subscriber

  • Catch22
    replied
    It should be on the pressure reducer. That big blocky thing that the hose from the cylinder goes into. Sometimes it'll get hid behind the brackets.

    Leave a comment:

  • ssooss
    Forum Member

  • ssooss
    started a topic S/N scott air pak 4.5

    S/N scott air pak 4.5

    hi brothers
    we have in our company used new scott air pak 4.5, but we do not found the serial no. of the set.

    could you please tell me where can i find the serial no.
    thank you

300x600 Ad Unit (In-View)

Collapse

Upper 300x250

Collapse

Taboola

Collapse

Leader

Collapse
Working...
X